Does the Active Directory user have an Exchange Mailbox?

Part of a script I built to deal with starters and leavers is to hide a leavers mailbox from the GAL.

I do this because
• We do not re use user objects, we keep them in a disabled state so references to sAMAccountNames in audit logs are valid.

• Leaver’s mailboxes stay online for 3 months after a leave date, as frequently the line manager may require access.

• After 3 months we archive and remove leavers exchange mailboxes, but as above the user object stays.

All leavers accounts are in a generic “leavers OU”

To hide the account from the GAL, the script loops through each user in the leavers OU and if the hidden from GAL attribute on the mailbox isn’t true, it sets it.

Simple enough,  but there will be users in there who no longer have Exchange mailboxes as they have been archived.  So the script errors all over the place because the get-mailbox $user part of the script fails for those objects.
So, I want to wrap an IF statement in the loop to only look for the variable if the user has an exchange mailbox.

How would I know? There are lots of obvious attributes I can think of, but how do I know that they are removed when the mailbox is disabled / gone.

So quite simply, I took a dump of get-aduser $user BEFORE disabling the mailbox, and then after and compared them.

The following attributes have data in them when a mailbox is present, and are null when a mailbox is disabled.

EmailAddress
homeMDB
legacyExchangeDN
mail
mailNickname
mDBUseDefaults
msExchDumpsterQuota
msExchDumpsterWarningQuota
msExchELCMailboxFlags
msExchHomeServerName
msExchMailboxGuid
msExchMailboxSecurityDescriptor
msExchMailboxTemplateLink
msExchMobileAllowedDeviceIDs
msExchMobileMailboxFlags
msExchOWAPolicy
msExchPoliciesIncluded
msExchRBACPolicyLink
msExchRecipientDisplayType
msExchRecipientTypeDetails
msExchTextMessagingState
msExchUserAccountControl
msExchVersion   
proxyAddresses
showInAddressBook
textEncodedORAddress 


I used msExchMailboxGuid in my script

Foreach ($user in $leavers)
{
      If ($user.msExchMailboxGuid)
      {
             $mailbox = Get-mailbox $user.samacountname
             If ($mailbox. HiddenFromAddressListsEnabled -eq $False)
             {
                    Try
                    {
                              Set-Mailbox -Identity $User.SamAccountName -HiddenFromAddressListsEnabled $True
                    }
                    Catch
                    {
                             $_.exception.message
                    }
            }
      }
}

Hyper-V Memory and Disk Allocations - Common Values

This post Is more of a reminder for myself opposed to something you will struggle to find elsewhere on the internet.

I work with Hyper-V a lot, bizarrely memory allocation is done in MB (who assigns less than a gig of RAM nowadays!) and disk space in GB (Fair enough, but I find myself creating 1tb+ VHD’s more often than less than a TB)

The table below lists some common conversions

MB to GB
Typical RAM allocations

MB	GB
1024	1
2048	2
4096	4
8192	8
12288	12
16384	16
32768	32
65536	64

 
GB to TB
Typical Disk allocations

GB	TB
1024	1
2048	2
3072	3
4096	4
5120	5
10240	10
15360	15
20480	20

ASP.NET fails to detect internet explorer 10 – The patches

We all know about the bug in .net 2 and .net4 browser definition files that prevents it from recognising certain browser types (namely IE10)

There are hotfixes available for this, but not via Microsoft update – you have to request them and the link is emailed to you.

This is an easy enough process and can be requested from:

.NET 4 - http://support.microsoft.com/kb/2600088

.NET 2.0

http://support.microsoft.com/kb/2600100 - for Win7 SP1/Windows Server 2008 R2 SP1, Windows Vista/Server 2008, Windows XP/Server 2003

http://support.microsoft.com/kb/2608565 - for Win7/Windows Server 2008 R2 RTM

 

Or, if you run Server 2008 R2 SP1, here are the direct download links to save time:

 

.net 4

http://hotfixv4.microsoft.com/.NET%20Framework%204.0%20-%20Windows%20XP,%20Windows%202003,%20Windows%20Vista,%20Windows%20Server%202008,%20Win7,%20Windows%20Server%202008%20R2%20(MSI)/nosp/DevDiv953277/30319.504/free/436907_intl_x64_zip.exe

 

.net 2.0

http://hotfixv4.microsoft.com/.Net%20Framework%202.0%20–%20Win7%20SP1,%20Windows%20Server%202008%20R2%20SP1%20(CBS)/sp2/DevDiv953290/50727.5692/free/437212_intl_x64_zip.exe

Changing IP Settings on an SQL Cluster

This simple five minute job during an implementation  really threw me.

To paint a picture there is a three node SQL cluster with two instances (2 Active nodes, one Passive) these are isolated from clients behind a firewall.

To facilitate a hardened firewall policy to permit only TCP 1433 to the instance resource group IP addresses, as well as  ensuring only the instance resource group IP address listens on that port (opposed to the default ALL IP’s setting) some changes are required to the network settings in SQL configuration manager.

On a standalone SQL server, it’s simply a matter of changing the settings using the Configuration Manager GUI, restarting the SQL service and the change takes effect. However when in a cluster the changes revert back to the previous ones immediately after clicking ok.

After venturing into this issue a bit more I discovered what I was trying to do wasn’t really documented any ware, but some other articles pointed me in the general direction of the joys of quorum in clustering. In a nutshell I was making a change on one box but as the registry settings being changed are managed by the cluster service the the other two nodes in the cluster won quorum and overwrote the settings.

To change these settings the cluster the reservation checkpoint for the registry path needs to be removed, the changes made in the registry and then the cluster reservation checkpoint added again.

The first step is to get the checkpoint name of the instance you are going to modify, run the following command:

Cluster res /checkpoints

Once you have the instance name, take the SQL server offline in failover cluster manager and run the following command:

cluster res "SQL Server (INSTANCENAME)" /removecheck: "Software\Microsoft\Microsoft SQL Server\MSSQL.INSTANCENAME\MSSQLSERVER"

You should now edit the registry or use SQL configuration manager to make the changes you wish to make.
Personally I prefer to edit the registry as this enables you to delete the unused IP addresses and just leave the cluster IP in place, which is much tidyer.
The path to edit the registry settings is

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.INSTANCENAME\MSSQLServer\SuperSocketNetLib\Tcp\

Delete any of the IPx keys you don’t need but leave IPAll
To specify the port for the IP address to listen on, simply modify the TCPPort value, and remove the value from the TcpDynamicPorts
Once you are happy with the changes, run the following command to add the checkpoit back into clustering

cluster res "SQL Server (INSTANCENAME)" /addcheck: "Software\Microsoft\Microsoft SQL Server\MSSQL.INSTANCENAME\MSSQLSERVER"

Bring the SQL Server resource back online and check SQL configuration manager, the changes should have taken affect.

As a result of this change, your firewall rules will be more secure as the massive dynamic port range doesn’t need to be permitted and if need be both SQL instances can be failed over to the one server without ports comflicting. There is also the added bonus that the IP configuration in SQL configuration manager looks a whole lot tidyer.

Are SAN’s “old hat”? Bring on the DAS

Here goes my first “opinion” post opposed to one detailing a useful command or script.

I’m in the middle of a greenfield infrastructure redesign at the moment; a topic that has been playing on my mind is SAN vs. DAS. When I say SAN, I’m talking about a storage area network. That’s several trays of disk attached to a SAN head unit, which is then connected to a pair of fibre switches, or to a 10gig switch via Ethernet. Servers are then connected to the switches (via Fibre or Ethernet). When I say DAS, I’m talking about Direct Attached Storage. That’s several trays of disk attached to a DAS head unit, which is then connected to a number of servers via SAS cables, or indeed just a dumb tray or trays of disk connected directly to the server.

So, what are SAN’s traditionally used for? In a basic sense they present a large (or small) amount of scalable storage to a number of servers.  Why do these servers need this storage? Either because the server hosting the application needs more disk space or spindles than you can fit into the server chassis, or if you are utilising clustering and need shared storage between two servers.

Clustering is what I think changes things. It has always struck me that you build clusters with multiple nodes, NIC’s, power supplies etc to offer high availability and yet the data is still in one place. Therefore  the SAN  is effectively a single point of failure.

Traditional Cluster

Although a SAN itself will have no single point of failure (dual controllers, multiple paths etc.) the data is still on a single RAID volume so could potentially be a victim of bitrot or the RAID group having a hole punched in it. There is also the obvious risk that the physical file could become corrupt. Software vendors are obviously thinking the same.  Exchange 2003/2007 was made highly available in the traditional cluster sense (multiple nodes with the DB on shared storage).

In Exchange 2010 however you have the concept of DAG’s. With DAG’s the database itself is replicated to nodes rather than being shared.  This means a SAN is not required to provide a highly available exchange environment.  If you can find a server with enough capacity you can run two (or three, or four) exchange servers in a DAG and have mailbox databases failover between them. This is actually more resilient than a traditional exchange cluster because the databases are being replicated rather than shared, which means you have protection against a corrupted database, as well as hardware failure.

Exchange 2010 DAG.

The upcoming SQL 2012 “always on” feature works in a very similar way to DAG’s. The selected databases are replicated between cluster nodes.  This means you can now have two core business systems (Exchange and SQL) made highly available without needing any kind of shared storage.

Failover clustering in itself is also moving forward with “shared storage-less clusters”. You can create a cluster and use a file share as a witness, which means that’s another requirement for shared storage out of the window!

If you have services you would like to make highly available and they don’t require a common area to write to, you can easily make them highly available in failover clustering by using a file share witness. If a service does require a common area to read or write data to, then you could always create the directory locally on each server and use DFS replication to keep them in sync.

This brings me on nicely to DAS. With applications moving to a model where shared storage isn’t required, the only real reason you would need a SAN is to present more storage or spindles to a server.  Because there isn’t the need for multiple servers to all access a common bit of storage, DAS comes into play. You can buy a dumb tray of 12 disks that can have additional trays daisy chained off of it to provide around 120ish disks for about  £7k per tray (the Dell Powervault MD1200 for example) these can be dual connected to a single host. Or if you want to connect more hosts to the DAS solution, you can get an “intelligent” DAS head unit that can then have multiple “dumb” trays connected to it to provide 192ish disks. These can usually support four dual connected hosts and can be picked up for about £12k. (the Dell Powervault MD3200 for example)

There are still applications that require shared storage, such as Hyper-V or VMware for example. In this scenario the MD3200 (intelligent) with a few MD1200’s (Dumb) connected to it would be ideal. You can have four nodes in the cluster sharing the storage.

The initial reaction I get to this suggestion is that of shock, as it’s not very scalable like a SAN. I understand the argument, but on the flip side, do you really want 10 – 20 hosts sharing the backplane of your SAN (6 – 12gig) with the DAS solution those four hosts are sharing the dual 6gig backplane.  If you need more servers then you’ll probably need more storage, so buy another head unit instead of a dumb tray. This method leaves you with two clusters of four nodes each with their own 12gig backplane (2x 6gig) opposed to potentially eight nodes sharing the SAN’s backplane.

I’m a big fan of DAS over a SAN for several reasons:

·         The physical trays are cheaper than trays for a SAN

·         There is no requirement for fibre switches which are eye wateringly expensive, not only for the tin but also the port licencing

·         DAS is really simple as the cable goes from the head unit to the server. Simple is fast and also easy to support and fix when it goes wrong.

·         DAS removes a single point of failure. It’s affordable to build two SQL clusters attached to 2 DAS arrays. Unless you’re a fortune 500 company you wouldn’t be able to do this with a SAN.

I can also see the downsides of DAS vs.SAN

·         Physical limit of SAS cables mean your servers need to be near the DAS head unit.

·         The administrative overhead of many storage arrays vs one SAN.

·         DAS lacks some of the mirroring features that SAN’s do.

Based on the above though, I think the cost savings by going DAS in both financial terms and for simplicity, outweighs the disadvantages.

I’m open to constructive feedback on this; I still have an open mind on the subject. However at the moment I think SAN’s are a thing of the past in 90% of situations.

Getting service tag / bios info using powershell

Following on from my post “script to get service tag from dell device” I felt a bit “dirty” that I was using VB opposed to my new favourite thing in the world, powershell!

You can use a cmdlet “get-wmiobject” to pull all sorts of info from WMI, including the bios.

Therefore, this very simple one liner will return not only the service tag (or serial number for non dell devices), but bois version and a raft of other information.
Here is the command

Get-wmiobject win32_bios | fl *

The result will look something like this

If you have WinRM remoting configured, you can run this on a remote device by starting an interactive session, and then running the command

PS> enter-pssession servername
Server name: PS > get-wmiobject win32_bios | fl*

If you don’t have WinRM remoting enabled, run this command on the host to enable it.

PS > winrm quickconfig
WinRM already is set up to receive requests on this machine.
WinRM is not set up to allow remote access to this machine for management.
The following changes must be made:

Create a WinRM listener on HTTP://* to accept WS-Man requests to any IP on this machine.
Enable the WinRM firewall exception.

Make these changes [y/n]? y

WinRM has been updated for remote management.

Created a WinRM listener on HTTP://* to accept WS-Man requests to any IP on this machine.
WinRM firewall exception enabled.

Configuring default FTP logon domain

If you’re still stuck in the dark insecure age of the internet and using FTP, you may want users to login to your FTP site using their domain credentials.

By default, the FTP service will use the local user database on the server itself (unless you enter your username in the domain\username format), you can however configure IIS to use a domain by default.

Take caution in doing this though, if you’ve ever put an FTP server on the internet, take a look at the event logs, it will have a ton of brute force attacks on it within minutes.
By default FTP will be trying to authenticate locally, which is a much smaller attack surface (fewer users) as soon as you point it at your domain, it’s going to have a much larger attack surface (more users)

You need to make sure you don’t have any accounts such as “test” or users like “mary” with passwords of “password” or any dictionary word at all. You should also tie the FTP site down to the specific users that need access, so if an account does get compromised it can’t be used to put data in the FTP directory.
With the above in mind, use an elevated command prompt to run the following on the FTP server

adsutil set msftpsvc/DefaultLogonDomain "YourDomainName"

This will set the default logon domain for all FTP sites.

Keeping up to date with technology (Specifically Microsoft)

There is plenty going on with Microsoft Technology at the moment, Windows 8, Windows Server 8, cloud, Configuration Manager 2012, the list goes on.

Keeping up to date with these while still doing a dayjob is a struggle.
I use the RSS feed functionality in outlook and I have feeds from a select few blogs, so when something interesting comes along, its dropped into my outlook.
Below is a list of feeds that I use:

Ctrl P - The Data Protection Manager Blog! -
http://blogs.technet.com/b/dpm/rss.aspx

Windows Server Division WebLog - http://blogs.technet.com/b/windowsserver/rss.aspx

Windows Virtualization Team Blog - http://blogs.technet.com/b/virtualization/rss.aspx

Forefront Team Blog - http://blogs.technet.com/b/forefront/rss.aspx

System Center Configuration Manager Team Blog -
http://blogs.technet.com/b/configmgrteam/rss.aspx

Microsoft Forefront Unified Access Gateway Product Team Blog -
http://blogs.technet.com/b/edgeaccessblog/rss.aspx

Microsoft Server and Cloud Platform Blog - http://blogs.technet.com/b/server-cloud/rss.aspx

TechNet Blogs - http://blogs.technet.com/b/MainFeed.aspx?Type=BlogsOnly

The Configuration Manager Support Team Blog -
http://blogs.technet.com/b/configurationmgr/rss.aspx

The Microsoft Application Virtualization Blog - http://blogs.technet.com/b/appv/rss.aspx

The WSUS Support Team Blog - http://blogs.technet.com/b/sus/rss.aspx

Enterprise Strategy UK - http://blogs.technet.com/b/enterprise_strategy_uk/rss.aspx

Viewing queues on all hub transport servers in one handy PowerShell command

I can’t take any credit for this, a college and I came up with the idea that we needed a way of viewing the queues on all of our hub transport servers in once place, opposed to having to connect to each one individually, it just so happened that he came up with the goods quicker than I did!

So what is the problem?  Using the queue viewer in EMC, it will only display the queues on the server you have selected, the same goes for the PowerShell command get-queue; you have to specify a hub transport server.

The solution, pipe the results of a get-exchangeserver cmdlet filtered to return hub transport servers into the get-queue command.
Here it is – enjoy!

get-exchangeserver | where {$_.ishubtransportserver -eq $true } | get-queue | sort messagecount –descending

Thanks Jon!

Creating a dynamic distribution group based on any Active Directory attribute in exchange 2010

A Common requirement I’m sure for most businesses is to be able to send a mail to all users who are located in a specific building.

A dynamic distribution group based on the office attribute is surely the answer – well yes it is, but not using the Exchange Management Console.

I have the office attribute set for each user within active directory

However, if you use the exchange management console to build your query, its options are limited and does not include the office attribute.

Although using the EMC it isn’t possible, it can be done in powershell.

The new-dynamicdistributiongroup cmdlet doesn’t natively support anything other than the attributes you see listed in the EMC, however you can use a recipientfilter to specify any attribute you like.

The command below will create a dynamic distribution group called “Users in Example Office name” which will contain any user with the office location set to “Example office Name”

New-DynamicDistributionGroup -Name "Users in Example Office Name" -OrganizationalUnit "domain.net\users" -RecipientFilter { ((RecipientType -eq 'UserMailbox') –and (Office -eq 'Users in example office name')) }

This command can be extended futher using the –and variable. The command below would create the same dynamic distribution group, only the members would be those who are in the “Example office name” building AND their manager is James Bond

New-DynamicDistributionGroup -Name "Users in Example Office Name" -OrganizationalUnit "domain.net\users" -RecipientFilter { ((RecipientType -eq 'UserMailbox') -and (Manager –eq 'James Bond') –and (Office -eq 'Users in example office name')) }

A quick way to set calendar permissions using Powershell

A Common request from users is to grant others access to their calendars.
You can either talk the user through this, or setup a new outlook profile to open their mailbox and set it yourself using the GUI – both are time consuming.
This simple powershell command allows you to set permissions with ease:

add-mailboxfolderpermission -identity USERNAME:\calendar -user "Username of person who needs access" -accessrights reviewer

The Identity switch needs to be the username of the mailbox which you are giving access TO, the user switch is the user you are giving access FROM.
The accessrights switch is the level of access you wish to grant the user, the link below lists some additional switches you can use:

http://technet.microsoft.com/en-us/library/dd298062.aspx

Using a PAC file to set proxy settings

There are many ways to configure proxy settings, via a GPO, via a build, or an application.

Proxy settings can cause issues for mobile users if they use their device away from the corporate LAN as the proxy server will not be reachable, this will render the internet browser unusable (unless of course Direct Access has been implemented)

There are many solutions to this problem, some common ones are:
1. Teach users to enable and disable proxy settings, This is not the most elegant solution, is likely to cause a fair amount of support calls, and also means proxy settings cannot be enforced.
2. Run a 3rd party app that users can click on and select proxy on or proxy off. Im not a fan of these types of applications that sit there and use up resources for no real reason.

3. Run a login script that sets the proxy setting if you are connected to the corporate LAN, and doesn’t if you are not. This is a long winded way of doing it, and is not 100% effective.

In my opinion, the most effective and efficient way of configuring proxy settings is to use a proxy auto config file (PAC)
A PAC file contains a JavaScript function "FindProxyForURL(url, host)". This function returns a string with one or more access method specifications. These specifications cause the user agent to use a particular proxy server or to connect directly
.
You configure your browser (works in all popular browsers) to use a script to configure proxy settings, this setting remains in place permantly. If the PAC file is placed on a web server accessible only within the corporate LAN, if the user is away from the LAN, the config file is not found, so therefore a proxy is not used.

When the user is within the LAN, the file is found, and proxy settings configured.
Some say that a login script can achieve this too, however the login script requires you to login to take effect.

Take a scenario where a user is in the office, closes the lid on his or her laptop, gets on the train then opens the lid, and connects via 3G.
If proxy settings were configured with a login script, the office proxy settings would still be present unless the user logged off and on again.
With a PAC method in place, the browser looks for the settings each time a page is requested, therefore it would fail to find the config file and connect directly.
Below is an example PAC file which can be modified to suit your needs. This could be further extended to look at the current IP of the client, and return a different proxy depending on where the client is. Eg if the client is within an IP range which is associated with the Paris office, the Paris proxy would be returned, or if the client is on a New York IP range, the New York proxy would be returned.

function FindProxyForURL(url, host)
 {
        
        // Direct connections to Hosts
         if (isPlainHostName(host) ||
         (host == "127.0.0.1") ||
         (host == "www.a-whole-domain.com") ||
         (shExpMatch(host, "*.a-entire-domain.com")) ||
         (shExpMatch(host, "10.20.30.*"))) {
           return "DIRECT"
         } else {
           return "PROXY proxy-server.domain.com:8080"
         }
 }

Within this file, access to the IP range 10.20.30.0 - 10.20.30.255 would be accessed directly (bypassing the proxy) aswell as the domain www.a-whole-domain.com. anything under the domain a-entire.domain.com would also bypass the proxy. everything else will be directed at the proxy server "proxy-server.domain.com" on port 8080.
Add additional sites to the proxy bypass list by copying an existing line and pasting it below.


Although a WPAD file could also offer similar functionality, in my experience a PAC file is much more flexible and will enable changes to take effect instantly.

Using Powershell to grant access to all user mailboxes, or a whole exchange database

You may have a requirement to be able to open any users mailbox in your exchange 2010 environment.

The first thing to consider, is how you will control access, will you add individual users, or a security group with users in it.
A security group is the most efficient and tidiest by far, therefore this post will assume you are using a security group.

Method one

The first option is to give the security group full access to all user mailboxes

Advantage

The permissions will follow the mailbox around when it is moved between databases

Disadvantage

You will have to apply the permission to all new users you create

To use this method, use the Exchange Management Shell (also known as Powershell or EMS)to get all the mailboxes in your organisation, and then pipe this into a command that set the permissions:

Add-PSSnapin Microsoft.Exchange.Management.Powershell.Admin -erroraction silentlyContinue

$userAccounts = get-mailbox -resultsize unlimited

ForEach ($user in $userAccounts)

{

add-MailboxPermission -identity $user -user “Your Security Group Name” -AccessRights FullAccess

}

Method two:
The second option is to apply the permissions to the exchange mailbox database, so all mailboxes within that database will inherit those permissions.
Advantage

All new users will automaticly inherit the permissions you set on the storage group

Disadvantage

If different permissions are set on different databases, when users are moved between databases they will not be subject to the permissions that were assigned to the original database.

Use EMS to run the following command

Add-ADPermission -identity YourDatabasename -user “Your Security Group Name” -AccessRights genericall

Draining sessions from Remote Desktop Session Hosts / Terminal Servers

Maintaining terminal servers (or remote desktop session hosts as they are known now) in today’s world when users require access 24/7 is a challenge. Setting up an RDS farm, with a session broker will give you load balancing and fault tolerance. (I will write more about remote desktop server farms and session brokers in another article)

However notice I say “Fault Tolerance” this doesn’t mean that you can reboot session hosts without affecting users, it just means that your system will tolerate the failure of a session host. The users who were connected to the rebooted (or failed) session host will lose what they were working on and will have to reconnect.

The nature of a session broker is that it will try to distribute sessions evenly across all members of a farm; this is great, apart from when you want to reboot a session host without annoying your users.

There is no “live migration” of RDS sessions, once a user is on a host, that’s where they will stay until they log off. 

So how do you free up a session host to perform maintenance on it? Firstly you will need to plan your work in advance.

You can then use the “chglogon” command to begin “draining” sessions. There are many ways sessions can be drained, but it basically means the session host will stop accepting new connections. Eventually once your users have logged off, they will not be able to establish a new log onto the draining session host, so will establish a new connection on another session host, which mean eventually the session host you are draining will have no users logged into it.

There are four switches for the chglogon command:

/query – this will tell you what mode the session host is currently in

/enable – allows users to establish connections to the session host

/disable – doesn’t allow any new connections, or reconnections to an existing session.

/drain – doesn’t allow any new connections, but does allow users to reconnect to an existing session

/drainuntilrestart – does the same as /drain, but reverts to /enable after a reboot

NOTE: when using the /disable switch, this will prevent you reconnecting to the server via RDP. You need to ensure you have access to the console via another method other than RDP, or use the RD configuration utility from another RDS server to change the setting.

These commands could be utilised to help with automated updates. You could configure RDS1 to automatically install updates on a Saturday at 6PM, then create a scheduled task to run on a Friday at 6AM to run the chglogon /drainuntilrestart command.

This would hopefully mean by Saturday at 6PM there were no users left on RDS1 and it would be safe to automatically reboot after an update installation.

You could then use the same method with RDS2, RDS3 etc, but on different days to ensure 100% uptime of your RDS farm

Using dsget and dsrm to delete users who are a member of a group from active directory.

I use the “DS” set of commands almost daily, they are a very powerful set of tools, which allow the output to be piped between them.

In this example, we are going to use the dsget command, to retrieve a list of users from a security group, then pipe the result into dsrm to delete them.
This can be useful in an educational environment where lots of users leave at once, and hundreds of accounts need removing. Or in the current corprate climate, when an entire department disappears!

Before jumping in at the deep end, I recommend seeing what results you are going to pipe into a dsrm, so run the dsget command on its own.

Dsget group “cn=year13,ou=groups,ou=myschool,dc=domain,dc-suffix –members -expand

This will return the members of a group called “Year13” which is in an OU called “Groups”, which is within an OU called “myschool” which is in the domain domain.suffix.

You are telling the dsget command that it is looking at a group by specifying “group” after dsget. the switches at the end are also important.


-members tells dsget to return the members of the group
-expand returns all members of the group, if this isn’t used it is limited to 100

If you are happy with the results returned, you can pipe the results into DSRM. Piping is just like typing something into a command yourself, only you’re letting the previous command do the work.

To get the pipe character, hold shift and press your backslash key

Dsget group “cn=year13,ou=groups,ou=myschool,dc=domain,dc-suffix –members –expand | dsrm –noprompt

The –noprompt commant prevents dsrm from asking you to confirm before deleting each object. If your deleting a large amount of objects this well worth using (as long as you are confident the results being outputted by dsget are correct)

Error code 0xC004C020 when activating windows

When activating windows using a MAK key, if you receive the error code 0xC004C020 it means you have ran out of activations using that key.

You can login into the Microsoft licensing website to check how many activations you have remaining on your MAK keys, and also find the contact information to get additional keys if required.
https://www.microsoft.com/licensing/servicecenter/

Further information on activation error codes can be found here:

http://support.microsoft.com/kb/938450